Discounted cold rolled 99.95% pure molybdenum strip sheet plates used in Sapphire Crystal Growth
molybdenum foil/strip/sheet plate describtion:
1)Purity: ≥99.95%
2)Density:>10.2g/cm3
3)Surface:black,alkali washed,grinding,sandblasting,cold rolling
4)Size:Thickness 0.05-50.0mm Width 20-800mm Length 100-3000mm
molybdenum strip size:
Thickness mm |
Tolerance of thickness |
Width |
Tolerance of
Width |
Length |
Tolerance of
Length |
First Glass |
Two glass |
0.10~0.15 |
±0.01 |
±0.02 |
50~200 |
±2 |
100~1200 |
±5 |
>0.15~0.30 |
±0.02 |
±0.03 |
50~200 |
±2 |
100~1200 |
±5 |
>0.30~0.50 |
±0.03 |
±0.04 |
50~200 |
±2 |
100~1200 |
±5 |
>0.50~0.70 |
±0.04 |
±0.05 |
50~200 |
±3 |
100~1200 |
±5 |
>0.70~1.0 |
±0.05 |
±0.08 |
50~200 |
±3 |
100~1200 |
±5 |
>1.0~2.0 |
±0.06 |
±0.10 |
50~200 |
±5 |
100~1200 |
±5 |
>2.0~3.0 |
±0.08 |
±0.15 |
50~200 |
±5 |
100~1200 |
±5 |
>3.0~4.0 |
±0.10 |
±0.20 |
50~200 |
±5 |
100~1200 |
±5 |
>4.0~5.0 |
±0.12 |
±0.30 |
50~200 |
±5 |
100~1200 |
±5 |
Mo sheet plates size:
Molybdenum sheet application:
For producing electric light source parts,components of electric vacuum
Heat shield and heat elements for high-temperature furnace
Used to producing sputtering targets
Processing material of molybdenum disks,sheetsandfoils
Our Mo strip shets packing&delivery:
1)paper wrapped the sheets, then plastic paper protected from moisture
2)Foam board around the the inner wooden case
3)Standard exported plywood case outside
Delivery
Sample Delivery: 7-10 days is ok
Big order quantity: Usually we can supply within 20 days
Shipment Methods:
By express(EMS,TNT,DHL,UPS,FedEx)
By Sea or Air transportation
By land
By YWWEN special line or other special line
We also can deliver as the customers' need,send the material to the port.
We also supply molybdenum alloy plate,molybdenum copper alloy plate&MoW plate
High temperature molybdenum lanthanum(MoLa) alloy molybdenum plates
Molybdenum sheets: Thickness from 0.005 inches(0.127mm) to 0.150 inches(3.81mm)
Width: 20-600mm Length: <2000mm
It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields.
Molybdenum plates:Thickness from 0.187 inches(4.75mm) to 3 inches(76.2mm)
Width:20-600mm Length:<2000mm
It is widely used in the construction of furnace tooling
And parts and as a feed stock for the fabrication of parts for the electronics and Semiconductor industries.
High temperature molybdenum(MoLa) alloy plate properties:
high purity and excellent creep resistance
High level of thermal conductivity,
A low coefficient of thermal expansion,
Excellent resistance to oxidation at high temperatures,
Excellent resistance to electrochemical corrosion
TZM (titanium, zirconium, molybdenum) Alloy Plate
Molybdenum's prime alloy is TZM. This alloy contains 99.2% min. To 99.5% max. Of Mo, 0.50% Ti and 0.08% Zr with a trace of C for carbide formations.
TZM offers twice the strength of pure moly at temperatures over 1300'C. The recrystallization temperature of TZM is approximately 250'C higher than moly and it offers better weldability.
The finer grain structure of TZM and the formation of TiC and ZrC in the grain boundaries of the moly inhibit grain growth and the related failure of the base metal as a result of fractures along the grain boundaries. This also gives it better properties for welding. TZM costs approximately 25% more than pure molybdenum and costs only about 5-10% more to machine. For high strength applications such as rocket nozzles, furnace structural components, and forging dies, it can be well worth the cost differential.
Moly30% Tungsten70% alloy plate
This is another moly alloy that offers unique properties. It was developed for the zinc industry. This alloy resists the corrosive effects of molten zinc. Mo/30W has also proved effective in rocket nozzles and has the potential of offering enhanced performance in applications where any erosive effects are a factor.
Our molybdenum alloy relevant products and packing photoes,hope you are interested in them: